This is an old revision of the document!


Change Log

Release Version Section Description
2.1 Dashboard Need a way to create virtual buttons (On/Off, Manual/Auto)
2.1 Dashboard Long labels do not contain themselves to the component bounds and automatically resize. Example, LED box, a long label will go on top the box and overwrite other components.
2.1 Dashboard Long labels do not contain themselves to the component bounds and automatically resize. Example, LED box, a long label will go on top the box and overwrite other components.
2.1 Comms ADDED - Ability to write to DE-4000 Modbus Registers. Custom handlers can be created to received written data and store or take other action.
2.1 HMI ADDED - Automatic refresh between connected clients. Saving a change on one client forces the other client to updat.
2.1 Dashboard FIXED - Could not add a dashboard page between other pages
2.1 Dashbaord FIXED - Clicking on the delete (trashcan) would sometimes bring up the channel selector and add a component instead of removing the selected component.
2.1 Dashbaord ADDED - Ability to set background color of Virtual Channels to show alarm state, faults,etc
2.1 Config ADDED - Fault output can be inverted, activate when faulted or activate when not faulted
2.1 Config ADDED - Start up sequence, can turn on and turn off multiple DS outputs in a single start up state
2.1 Dashboard When defining an output there is now a single button channel selector
2.1 Dashboard ADDED - Up to 10 dashboard pages can now be configured. The previous limit was 7 pages.
2.1 Setup FIXED - Debug page numerous bug fixes. All outputs are now forced off when entering and exiting the debug page.
2.1 Setup FIXED - System would not power up if a terminal board was missing. Now the system will power up and alert the user of the missing terminal board(s).
2.1 Comms ADDED - Ability to read and write 32 bit integer and Floating point values over modbus (combine two 16-bit registers)
2.1 Config FIXED - Several issues with loading and saving parameters have been resolved
2.1 Config FIXED - Fixed error where “SAVE FAILED” would sometimes appear when saving configuration
2.1 Comms Modbus, system can be remotely locked with a modbus write, can only be unlocked with a code by someone with the unlock code
2.1 Comms All the main button presses (stop, reset, cancel timers etc.) can be initiated with modbus writes
2.1 Comms Can define cutsom modbus write registers. Can assign code to run when a modbus register is written to. Functions can use this then as a passed variable
2.1 Application High overspeed fault resolved
2.1 Config Ability to configure 10 PIDs using global PID page
2.1 Config Parameters page, user can define custom parameters that can be used in script.
2.1 Dashboard New display elements for the dashborad page, Toggle button, Up/down, up/down input
2.1 HMI HMI responsiveness has been improved
2.1 HMI Visible feedback on button presses of the HMI
2.1 Dashboard Can change background color on dashboard LED elements
2.1 Setup Cal bug fixed
2.1 Dashboard Custom fault function field
2.1 Comms Extended custom fault function can define extended fault codes that can be accessed over modbus
2.1 Ext Device Can take a value on an external device in a script and use it in the application
2.1 Comms Can add 10000 and 00000 registers to the dashboard
2.1 Config api req() is now added
2.1 Class C timer has default of 30 seconds. If trying to change a warning message will pop up